IBM Visualization Data Explorer User's Reference

IntegerList

Category

Function

Generates a list of integers within a specified range of values.

Syntax

Available only through the user interface.

Inputs

Name Type Default Description
data object no default object from which interactor attributes can be derived
refresh flag 0 reset the interactor
min integer minimum data value minimum output integer
max integer maximum data value maximum output integer
delta scalar input dependent increment between successive integer outputs
method string input dependent defines interpretation of delta input
nitems integer 11 number of items in the initial list
label string "IntegerList" global name applied to interactor stand-ins

Name	Type	Default	Description
`data`	object	no default	object from which interactor attributes can be derived
`refresh`	flag	0	reset the interactor
`min`	integer	minimum data value	minimum output integer
`max`	integer	maximum data value	maximum output integer
`delta`	scalar	input dependent	increment between successive integer outputs
`method`	string	input dependent	defines interpretation of delta input
`nitems`	integer	11	number of items in the initial list
`label`	string	"IntegerList"	global name applied to interactor stand-ins

Outputs

Name Type Description
output integer list interactor output

Name	Type	Description
`output`	integer list	interactor output

Functional Details

This interactor provides incremental control of various functions in a visual program (e.g., the number of contour lines currently displayed on an isosurface in the Image window). But it creates a list of integers, rather than a single integer, as Integer does.

The integer range over which the module acts is governed by its attributes (e.g., minimum, maximum, and delta), which in turn are either (1) specified by the parameter values in its configuration dialog box or (2) determined from input to the module (usually a data field). In the second case, the interactor is said to be "data driven."

If an interactor is not data driven, then the attributes (e.g., minimum, maximum, delta, etc.) are taken from the interactor's Set Attributes... dialog box (which is accessed from the Edit pull-down menu in the Control Panel).

Note: The interactor is invoked by double-clicking on its icon in the VPE window. Its configuration dialog box is accessed from the Edit pull-down menu in the same window.

data
is the object (usually a data field) from which the interactor can derive any or all of the minimum, maximum, and delta attributes when their corresponding input tabs are up.
refresh
resets the interactor so that the output is computed from the current input. If refresh = 0 (the default), the output is recomputed only if the current output does not lie within the range of the current data.
min and max
specify the minimum and maximum values of the interactor's integer output. If set, these values override those implied by data.
If neither min nor data is specified, the interactor uses the minimum set in the Set Attributes... dialog box.
If neither max nor data is specified, the interactor uses the maximum set in the Set Attributes... dialog box.
delta
specifies a scalar value as a factor for calculating the increment between successive outputs over the specified range. The actual value depends on the interpretation specified by method (see below).
method
specifies the interpretation of delta:

"rounded": the increment (max - min) × delta is rounded to a "nice" number. The spacing between successive values will approximate the interval specified by delta. (For example, the default value of 0.01 specifies an interval of 1/100 of the specified range.)
"relative": the interpretation is the same as for "rounded," but the increment is not rounded.
"absolute": delta is the absolute value of the interval. (If delta has not been specified, its default is 1.)
The default value for method depends on other input. The default is:

"rounded" if data is specified or if both min and max are specified.
"absolute" in all other cases.

nitems
specifies the number of items in a newly created list. These are evenly spaced between the minimum and maximum values (see above). For example, if this parameter is given a value of 5, and the range is 0-100, the output list will be {0, 25, 50, 75, 100}.
Notes:

If nitems changes, a new list is computed.
This parameter takes affect only if the minimum and maximum are set with the min and max parameters or with data parameter.

label
is the global label of all instances of the corresponding interactor stand-in. An interactor instance's local label (set from the Control Panel) overrides a global label. By default, the global label is set by the user interface.

[Data Explorer Home Page | Contact Data Explorer | Same document on Data Explorer Home Page ]

[IBM Home Page | Order | Search | Contact IBM | Legal ]

`data`	is the object (usually a data field) from which the interactor can derive any or all of the minimum, maximum, and delta attributes when their corresponding input tabs are up.
`refresh`	resets the interactor so that the output is computed from the current input. If `refresh` = 0 (the default), the output is recomputed only if the current output does not lie within the range of the current `data`.
`min` and `max`	specify the minimum and maximum values of the interactor's integer output. If set, these values override those implied by `data`. If neither `min` nor `data` is specified, the interactor uses the minimum set in the `Set Attributes...` dialog box. If neither `max` nor `data` is specified, the interactor uses the maximum set in the `Set Attributes...` dialog box.
`delta`	specifies a scalar value as a factor for calculating the increment between successive outputs over the specified range. The actual value depends on the interpretation specified by `method` (see below).
`method`	specifies the interpretation of `delta`: "rounded": the increment (`max` - `min`) × `delta` is rounded to a "nice" number. The spacing between successive values will approximate the interval specified by `delta`. (For example, the default value of 0.01 specifies an interval of 1/100 of the specified range.) "relative": the interpretation is the same as for "rounded," but the increment is not rounded. "absolute": `delta` is the absolute value of the interval. (If `delta` has not been specified, its default is 1.) The default value for `method` depends on other input. The default is: "rounded" if `data` is specified or if both `min` and `max` are specified. "absolute" in all other cases.
`nitems`	specifies the number of items in a newly created list. These are evenly spaced between the minimum and maximum values (see above). For example, if this parameter is given a value of 5, and the range is 0-100, the output list will be {0, 25, 50, 75, 100}. Notes: If `nitems` changes, a new list is computed. This parameter takes affect only if the minimum and maximum are set with the `min` and `max` parameters or with `data` parameter.
`label`	is the global label of all instances of the corresponding interactor stand-in. An interactor instance's local label (set from the Control Panel) overrides a global label. By default, the global label is set by the user interface.